Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Accessories/Parts

Yakima TubeTop
$49.99
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts. This Item may be in stock with Black accents or with Red, but both use the same part numbers. Please contact us to confirm the color of product in stock.
Saris Bike Beam
$49.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris Hatch Huggers
$24.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Kuat Hi-Lo
$69.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
Yakima BaseClip
$72.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima RidgeClip
$144.00
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
Thule Cable Lock
$49.95
Thule's Cable Lock gives added security to your gear. This 6-foot coiled cable lock uses a Thule One-Key Cylinder (included).
Thule EasyFold XT Long Loading Ramp
$79.95
This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection
Thule Frame Adapter
$49.95
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.
Thule One-Key System 4 Pack
$69.95
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key
Thule One-Key System 6 Pack
$89.95
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key
Thule ProRide Fat Bike Adapter
$49.95
An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes
Thule Snug-Tite Receiver Lock
$69.95
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Thule T2 Pro X Fat Tire Holder
$69.95
Fat Tire holder for T2 PRO X
Thule Thule Hitch Extender
$69.95
Provides clearance for spare tires, barn doors, and tailgates when using a hitch bike carrier. - Two-position extension, 7" and 9", clears spare tires and allows for use of platform and hanging hitch carriers - 250 lbs weight limit carrying capacity - Provides a 2.25" drop for improved tailgate/rear door clearance - Bolt fixation to vehicle - Accommodates hitch rack bike carriers with a 2" stinger (Not for towed use)
Swagman 5/8
$37.50
The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Unique hidden pin cylinder for added security - Fits 2" only equipped racks - Threaded
Swagman 5/8-inch Pin and Cable
$55.00
- High security key allows for easy access with only a half-turn to unlock - Premium chrome plated for maximum rust protection - 8.5 ft. long 10mm security cable with hitch pin adapter
Swagman Cruiser/eBike Adapter
$45.00
The Swagman eBike/Cruiser Bar Adapter creates a higher top tube for your bike by attaching below the stem and seat post of your bikes. This will allow the ratcheting arms of your bike to hold step-through and heavier-weight bikes securely by grabbing onto the adapter. - Fits: Cruiser, eBikes and Step Through bikes requiring a higher top tube for use on Platform Hitch Mount Racks. - Max Load: 35 lbs. per bike when used on a Hanging Rack - Telescopic bar fits multiple bike sizes - Adapter comes equipped with vinyl-coated hangers - User friendly quick release - 25"-31" Maximum Width
Swagman X Mount
$51.50
Swagman brings you a brilliant tool for storing your hitch-mount bike rack when it's not attached to your hitch. The X Mount can be attached to any wall to create a virtual hitch. Just mount the rack like you would on your car or truck, and fold the rack up against the wall to get it out of the way. When you're not using it, the X Mount itself will even fold against the wall, creating an even lower profile. - Fits 2-inch receiver style bike racks and 2-inch receivers with 1-1/4-inch universal adapter. - Stores bike rack when not in use - Folds against wall when not in use
Saris Bones Strap Management End Caps
$19.99
Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones
Saris Freedom Fat Tire Wheel Holders
$49.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Saris Hatch Huggers SL
$24.99
Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.
Saris Hitch Tightener
$19.99
Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver. - Adds extra security to bike racks and hitch devices - Eliminates rattling and wobbling - Compatible with 2" receivers
Saris Hitch Tite
$14.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris Locking Cable 8'
$44.99
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Saris Locking Hitch Tite (Threaded)
$39.99
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Saris MHS 1+1 Base Universal Hitch
$159.99 $199.99 20% Off
The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Hitch Base and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Universal Hitch Base fits 1.25" and 2" receivers - Base accommodates 1 bike tray + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 2 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle
Saris MHS 2+1 Base 2
$199.99
The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Hitch Base fits 2" receivers - Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 3 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle
Saris Protect-O-Pads
$19.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Saris Rack Dollie
$49.99
Easy to move rack to/from vehicle without any lifting, this wheeled dollie attaches quickly t- most 2" receiver compatible racks - Wheels ensure smooth and effortless transport of rack to/from vehicle without any lifting - Connects to 2" stinger with simple pin - Works with most Saris hitch racks and other racks that bolt t- vehicle receiver - Easy to remove
Page 1 of 2 Next page